Air Regulator; Air Inlet - Napa 6-754 Manual De Instrucciones

OPERATION
Always insert the tool shank to full
depth in the collet. Tighten the collet
nut (#29) securely to prevent the
accessory from working out during
operation of the die grinder. ALWAYS
check the tightness of the collet nut
before operating the grinder.
When using the grinder be careful not
to exert excessive force. Too much force
could be hazardous if it caused the cut-
ting tool spindle to bend or break.

Air Regulator

WARRANTY POLICY: NAPA PROFESSIONAL AIR TOOLS are warranted against defects in material and
workmanship for a period of one (1) year from the date of the original purchase. We will repair or replace at our
option any defective part or unit which proves to be defective in material or workmanship during this one year
period. All NAPA PROFESSIONAL AIR TOOLS must be repaired only by authorized NAPA PROFESSIONAL AIR TOOL
Service Centers. This warranty does not cover damage to tools rising from alteration, abuse, misuse and does not
cover any repairs made by anyone other than an authorized NAPA PROFESSIONAL AIR TOOL Warranty Center.
Tools sent to a Warranty Center in a dissembled condition will not be covered as a warranty repair.
Return tools to Service Centers transportation prepaid. Be certain to include your name, address and phone
number along with proof of purchase information, with each tool.
4 PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE THIS MANUAL FOR FUTURE REFERENCE.
The burning of the work piece or exces-
sive reduction indicates too much force
being applied. Changing to
a free cutting tool may be better for
the desired rate
of speed and stock removal.
Avoid hazardous conditions by making
sure that there is sufficient gripping
force on the spindle of the cutting tool
by placing the spindle 7/16" or more
inside the collet.

Air Inlet

S
PECIFICATIONS
Thread/Collet Size . . . . 1/4"
Horsepower . . . . . . . . . 1/3
Overall Length . . . . . . 6.77"
Net Wt. . . . . . . . . . . . . 1.9 lbs.
Avg. Air Cons. . . . . . . . 4 CFM
Air Inlet . . . . . . . . . . . . 1/4"NPT
Hose Size . . . . . . . . . . . 3/8" ID
Free Speed . . . . . . . . . . 22,000 RPM
Sound Level . . . . . . . . . 91.0 dBA
Rev. 03/18/04