4. Attach the top panel (D) to the back panel (B)
using 2 M6 x 30 screws (BB).
5.
Place assembled item in desired location,
adjusting feet (CC) as needed to ensure it is
level. Then, place 20lb. propane gas tank
(not included) on top of stand (E).Turn the
pre-assembled wing screw on the stand (E)
clockwise to secure the gas propane tank.
6.Feed the regulator hose (from your gas appliance)
through the bottom of the item.
B
E
1-866-771-2663 | Page 5
D
BB
CC