Foremost Barcelona FI-BAR10DIN-S10 Manual Del Usuario página 3

1
Carefully turn the table top (A) upside down on a soft
surface. Loosely attach the table legs (B) to table top (A)
with bolts (D) through the table leg, big flat washers (E),
big lock washers (F) and securing with nut (G) using
wrench (N). As shown in figure 1.
Do not tighten the bolts at this point.
(Figure 1)
Figure 1
2
Loosely attach the leg connector rings (C1&C2) to table
legs (B) with bolts (I) through lock washers(K)and small
flat washers (J) using hex screw driver (O). As shown in
figure 2.
Do not tighten the bolts at this point.
Figure 2
(Figure 2)
3
Once all the table legs are aligned correctly, tighten all
nuts (G) and bolts (I) with wrench (N) and hex screw
driver (O). With the help of another person, carefully turn
the table to the upright position. Cover all nuts (G) with
nut cover (H) and all bolts (I) with PVC cover (L).
(Figure 3)
Figure 3