Maintenance Schedule - Star Trac 8-TH Trail Hiker El Manual Del Propietario

With durable, high performance components, this equipment is designed for heavy usage with minimal maintenance required.
To keep it in top condition, perform regular daily, weekly and monthly preventive maintenance routines outlined below.
The safety and integrity of this machine can only be maintained when the equipment is regularly examined for damage and
wear and repaired. It is the sole responsibility of the owner of this equipment to ensure that regular maintenance is performed.
Worn or damaged parts must be replaced immediately or the equipment removed from service until the repair is made.

MAINTENANCE SCHEDULE

General Maintenance
Check Belt Tracking to assure belts stay centered
Check Condition of Power Cord
Inspect and Clean underside of belts
Check drive belt tension
Check belt tension, adjusting if needed
Check all settings and Keypad Performance
Calibrate
Check Belt and Deck Condition and replace if wear found
Unplug unit and check all power connections
including speed sensor
Lubrication
Pillow Block Bearings
(Multi-Purpose Grease)
Cleaning
Wipe Down all Surfaces
Wipe Running belt with Dry Cloth
INSPECTION
Inspect the frame for any rust, bubbling, or paint chips during the daily cleaning. The salt in perspiration can damage the
unpainted surfaces. Repair the damaged area with a touch-up paint kit purchased from
Core Health & Fitness (call Customer Service for order information).
NOTE: To prevent potential damage to the IEC connector when moving the machine, we recommend that you unplug the
power cord from the machine before moving.
Daily Weekly Monthly Bi-Annually
X
X
X
X
X
X
X
X
X
X
X
Page 21