Technical Features; Remote Control; Using Bluetooth - Thonet & Vander TITAN Manual De Instrucciones

EN

TECHNICAL FEATURES

POWER OUTPUT: 180W RMS (90W + 90W)
FREQUENCY RESPONSE: 30Hz - 20kHz
DISTORTION: <0.1% - 1W
S/N: >70dB
SEPARATION: >50dB
ACOUSTIC BOX MATERIAL: Wooden box HDAA™
ACOUSTIC BOX SIZE: 400 x 300 x 300 mm
DRIVER SIZE: Woofer 8"
DRIVER MATERIAL: Aramid Fiber
IMPEDANCE/POWER: 6 Ω 70W
TWEETER SIZE: 1"
TWEETER MATERIAL: Silk
IMPEDANCE/POWER: 6 Ω 35W
ANTIMAGNETIC SHIELD
BI AMPLIFICATE
ACTIVE CROSSOVER
DSP DIGITAL SIGNAL PROCESSING
CONTROLS: Volume, treble, bass
REMOTE CONTROL: Wireless
INPUTS: Bluetooth® 4.0 + aptX® / RCA stereo /
1 S/P diff optical
ACCESSORIES
_ 2 RCA - 3.5mm stereo auxiliary
_ Cable for connecting passive speaker
_ Power cable (IEC 60320 C7)
_ Power cable (IEC 60320 C7) UK plug BS 1363
*Included in certain countries.-
STAND BY
The speaker will start in stand-by mode. To turn it on press
INPUT/Stand-by button. The speaker will be ready to use. If you
want to set it back to stand-by mode, hold the stand-by button
for 3 seconds.
USING BLUETOOTH®
Press INPUT/Stand-by button (side panel) or INPUT button
16
LISTEN TO THE BEAST