Troubleshooting - Lanaform Trainy Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

We recommend:

1) Using boiled water which has been allowed to cool or distilled water each time,

2) cleaning the tank every 3 days and the transducer every week,

3) changing the water in the tank regularly so that it is fresh, not leaving it in the appliance for more than 2 days,

4) Cleaning the appliance and making sure that all its components are completely dry when not in use.

To clean the transducer:

1) Pour 2 to 5 drops of vinegar on its surface and leave for 2 to 5 minutes.

2) Brush the scale off the surface with a soft brush. Do not use a hard tool to scratch at the surface.

3) Rinse the transducer with clear water.

4) Do not use soap or other alkaline substances to clean the transducer.

To clean the tank unit:

1) Clean the water tank with a soft cloth and use vinegar if there is scale or chalky deposits on its interior.

2) If there is scale covering the cut-out switch, pour a few drops of vinegar on it and clean with a brush.

3) Rinse the tank with clear water.

Storage:

1) Carefully clean and dry the ultrasound humidifier, following the maintenance instructions.

2) Let it dry completely before placing in storage. Do not store it with water remaining in the base.

3) Store the appliance in a cool and dry place away from children.

To clean the filter

1) The performance of the demineralisation process and life of your filter depends on the mineral content of the water

used with the humidifier. As a reminder, distilled or demineralised water is recommended.

2) Please consider rinsing the filter with clear water every 2 days. In order to achieve this, remove the latter from the tank

plug.