Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
4-dRAwER bb ROLL-AwAy cAbiNET
MOdEL # 31014
service parts
caLL 1-800-4my-Home or (1-800-469-4663) for service
parts. Refer to Service Parts drawing for full listing of Service
Parts.
LocatiNG moDeL # iNformatioN
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
capacities
• The maximum weight for each drawer should be no more than
25 pounds.
▪ Empty weight of the unit is 67 lbs
• The maximum product weight, including contents, should be no
more than 300 pounds.
maiNteNaNce
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
distributed by Sears brands Management corporation, Hoffman Estates, iL 60179
All manuals and user guides at all-guides.com
R
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax as to
a car. The wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• if drawer liners are supplied, it is recommended they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned with soap and
water.
DaNGer
if not avoided, will result in serious injury or death.
WarNiNG
avoided, could result in serious injury or death.
cautioNis used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
cautioN: Read and follow all Safety Rules and Operating
instructions before first use of this product.
DaNGer
• Do Not stand on this product. you may fall or cause product to
tip.
• Do Not open more than one drawer. The product may become
unstable and tip.
• Do Not step in the drawers. you may fall or cause product to
tip.
• Do Not mount this product on a truck bed or any other moving
object.
• Do Not move the product prior to closing and locking all the
drawers. The drawers could come open and make the product
unstable and tip.
WarNiNG
• Wear safety GLasses when removing or repositioning the
slides.
• Do Not pull this product when moving it. Push the product to
prevent personal injury.
• use tHe BraKes when not moving this product. This will
prevent the product from rolling.
• Do Not alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• Be carefuL when closing the cover. Remove hands before
the cover closes completely.
cautioN
• This product is not designed to be directly lifted with a fork lift, or
to be towed with any mechanical devices.
• The maximum weight for each drawer should never be exceed-
ed.
• Only transport this product empty. Properly secure when trans-
porting.
• Do Not exceed maximum product weight, including contents.
See Operations Sections: capacities for more information.
ball bearing slides
safety
is used to indicate a hazardous situation which,
indicates a hazardous situation which, if not
Friction slides
F1817

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Craftsman 31014

  • Página 1 • Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water. MOdEL # 31014 • Auto wax will preserve the unit’s luster finish. Apply the wax as to a car. The wax will also help protect the unit against scratches.
  • Página 2: Caster Installation

    All manuals and user guides at all-guides.com HarDWare assemBLy caster iNstaLLatioN items Needed: tooLs requireD: 1/4 - 20 x 5/8" (Qty: 16) 3/8” wrench 1/4 - 20 Nut (Qty: 16) Screwdriver 3/8-in wrench process: Hardware included: • Remove bottom drawers. (See Operation Section, Part •...
  • Página 3 All manuals and user guides at all-guides.com Lever style - Lift or lower (depending on the slide) the operatioN release lever on both sides, (this allows the slides to ride Note: Not all operation instructions will relate to your model. over the stops.) Pull out to remove.
  • Página 4 All manuals and user guides at all-guides.com operatioN iNstaLLiNG DraWers Ball bearing slide - Pull slides and slide carrier out to fully extended position (see illustration.) Hold the slide on the cabinet while aligning it with the slide on drawer. Slightly insert one side and repeat for the other side.
  • Página 5: Mantenimiento

    • Lubrique la cerradura con grafito (anualmente). • Limpie con detergente suave y agua los frontales y los bordes laterales MOdELO NO 31014 de los cajones y las demás superficies. • La cera para automóviles preservará el acabado brilloso de la unidad.
  • Página 6: Herramientas Necesarias

    All manuals and user guides at all-guides.com ferreterÍa eNsamBLaJe iNstaLacioN DeL tiraDor (solo Gabinete) HerramieNtas Necesarias: Llave de 10mm elementos necesarios: No. 1/4-20 X 5/8" (cant.: 16) No. 1/4-20 X Tuerca (cant.: 16) destornillador, punta de cruz Llave inglesa de 3/8-in (Llave de 10mm) proceso: piezas iNcLuiDas: •...
  • Página 7 All manuals and user guides at all-guides.com estilo fricción - extienda completamente la gaveta. inserte el remociÓN De Gavetas destornillador en la ranura del costado y presione el tope hasta • Vacíe la gaveta. que libere el rejón. Hale la gaveta justo después del rejón antes •...
  • Página 8 All manuals and user guides at all-guides.com iNstaLaciÓN y DesiNstaLciÓN De correDeras • Para quitar la corredera de la unidad, primero quite la gaveta. • despues de retirar las gavetas taladrar los remaches, utilice una broca de 5/32-in. Los remaches necesitaran ser reemplazados •...

Tabla de contenido