QFX TV-LED1912D Manual De Instrucciones página 23

TV
- Press SOURCE button on unit top or remote control to set the unit in TV mode.
SELECT WANTED PROGRAM
1. Press CH+ button to play next channel.
2. Press CH- button to play previous channel.
3. Press numeric buttons on the remote control directly to select wanted program.
Example : Track 9, press ＂9＂, three seconds later it will turn to track 9 automatically, or
press ENTER button to confirm directly.
Track 12, press ＂1＂ and ＂2＂, three seconds later it will turn to track 12 automatically,
or press ENTER button to confirm directly.
NOTE : If one frequency dot has more than one channel, for example, track 15-3,
press ＂1＂ and ＂5＂, then press ＂-/--＂ and ＂3＂, three seconds later it will turn to
track 15-3 automatically, or press ENTER button to confirm directly.
VOLUME CONTROL
- Press VOL+ or VOL- to adjust the level of current volume.
Available range: 0-100.
MUTE CONTROL
- Press MUTE button to mute the sound, press it again to turn on the sound.
NOTE: When the unit is in MUTE mode, press VOL+ button will turn on the sound and turn
it up; press VOL- button will keep the unit silence.
SOURCE SETTING
- Press SOURCE button on remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, then press ENTER
button to confirm selection.
- Or press SOURCE button on unit top repeatedly to select desired input source.
Available options: TV, AV, YPbPr, HDMI, PC, Media, DVD.
PICTURE MODE
- Press PICTURE button on remote control repeatedly to select desired picture mode.
Available options: User, Dynamic, Standard, Movie.
SOUND MODE
- Press SOUND button on remote control repeatedly to select desired sound mode.
Available options: User, Dynamic, Standard, Soft.
22