WAGNER PALERMO Manual Del Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
PALERMO
INSTALLATION
Choose a site for installation with as much irradiation as possible. Do not place the
PALERMO in the shade of trees, bushes or buildings, as this will greatly reduce the
degree of efficiency of the PALERMO.
PERFORMANCE
The performance of your PALERMO depends on the time of year. PALERMO is ready
for operation longer in summer than in winter.
How long PALERMO shines at night depends on how long PALERMO was exposed to
direct solar radiation during the day. For example, when the sky is overcast, less solar
energy is available to load the rechargeable battery. During the following night, the
duration of emission of light of PALERMO is therefore shorter. The duration of emission
of light is strongly limited on winter days due to lower exposure to solar radiation.
NOTE:
Clean the solar module regularly with a damp towel to guarantee
optimum performance of the solar collectors. Do not use any
solvents for cleaning. Do not put any pressure on the solar module
during cleaning.
FAILURE CORRECTION
If PALERMO should fail to function despite observance of all instructions, please pro-
ceed as described in the following steps :
1) Turn the selector switch several times to the positions „OFF" and „ON".
2) It may occur that your PALERMO is ready for operation but it is covered by
another source of light. In this case, relocate the solar station.
3) Ensure that your PALERMO does not stand in the shade during the day.
4) Check the rechargeable battery for corrosion.
REMOVING / CHANGING THE RECHARGEABLE BATTERY (5 - 7)
ATTENTION:
1) When removing/replacing the rechargeable battery, the
selector switch must be in position „OFF"!
2) Use Original Wagner rechargeable batteries only.
3) When inserting batteries, make sure the polarity is correct (+/-)
Manually turn the solar module-counter-clockwise in order to seperate it from the
lamp unit
.
Remove the rechargeable battery to re-load it and/or exchange it
Re-assembly is accordingly conducted in the reverse order.
All manuals and user guides at all-guides.com
GB
.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido