Stanley FATMAX SFMCCSB664 Traducido De Las Instrucciones Originales página 13

implied, is given. It is the buyer's responsibility to ensure that its
activities comply with the applicable regulations.
Storage Recommendations
1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum
battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely depleted
of charge. The battery pack will need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge STANLEY FATMAX battery packs only
with designated STANLEY FATMAX chargers.
Charging battery packs other than the
designated STANLEY FATMAX batteries with a
STANLEY FATMAX charger may make them burst or
lead to other dangerous situations.
Do not incinerate the battery pack.
Battery Type
The SFMCCSB664 operates on a 54 volt battery pack.
These battery packs may be used: SFMCB6025, SFMCB605,
SFMCB6075. Refer to Technical Data for more information.
Package Contents
The package contains:
1 Chainsaw
1 Scabbard
1 Bar 40 cm
1 Chain 40 cm
1 Instruction manual
NO BATTERY OR CHARGER INCLUDED
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Wear respiratory protection.
Do not leave in rain.
Tip contact can cause the guide bar to move suddenly
upward and backward, which can cause serious injury.
Contact of the guide bar tip with any object should
be avoided.
Rotational direction of the saw chain.
Always use two hands when operating the chainsaw.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery from
the tool.
Directive 2000/14/EC guaranteed sound power.
104
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
ON/OFF trigger switch
1
Lock-off lever
2
Chain brake / front hand
3
guard
Guide bar
4
English
Saw chain
5
Sprocket cover
6
Bubble level
7
Bar adjust locking knob
8
Chain tensioning knob
9
11