I Settings; Changing The Audio Language Or Sound Mode - Hitachi DV-P725U Manual De Instrucciones

¡ Press the s button to go back to the previous upper
hierarchy.
¡ If the entire program cannot be displayed at once on
the screen, " L " appears to go to the next page.
3
When the disc has been programmed, press
the PLAY button.
¡
Programmed play starts.
CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
The DVD player has a function which allows you to
select the desired audio language and sound mode.
For DVDs
Press the AUDIO button during playback, and then
press the AUDIO button to select the desired audio
language.
¡ The audio language can be changed if multiple
languages are recorded on the DVD being played.
AUDIO 1.ENG DolbyD 5.1CH
AUDIO 2.FRE DolbyD 5.1CH
AUDIO 3.JPN DolbyD 5.1CH
HELLO
Note
¡ For some Audio language, three dashes ("---" ) may
appear instead of a three-letter abbreviation for the
language (ENG, FRE, etc.).
All manuals and user guides at all-guides.com
SETTINGS
DVD CD VCD
Bon jour
– 22 –
Notes
¡
Press the CLEAR button, and the last-programmed
entry will be deleted.
¡ Press the RETURN button, and the STOP screen
will show up with the program contents in memory.
¡ The program setting will be cancelled when the
power is turned off or the disc tray is opened.
For audio CDs, video CDs
Press the AUDIO button during playback.
¡
Pressing the AUDIO button cycles the sound mode
through STEREO, L-CH and R-CH.
AUDIO STEREO
AUDIO L-CH
AUDIO R-CH
Notes
¡
Pressing the Audio button may not work on some
DVDs with multiple audio languages (e.g. DVDs
which allow audio language setting on the disc
menu). Operation varies between discs, so refer to
the manual accompanying the disc.
¡ Current audio language and sound mode will be dis-
played when you press the AUDIO button at first.
¡
If a desired language is not shown after pressing the
Audio button several times, the disc does not have
an audio source in that language.
¡ The audio language resets to the one which has been
selected in the setup mode, every time the power is
turned on or discs are replaced. If that language is
not available on a disc, a language defined by the
disc is selected.
¡
The screen display will disappear after about 5
seconds.
¡ If you use DIGITAL AUDIO OUT jack, the sound
mode of audio CDs and Video CDs can not be
changed.
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
EN
1L01