LevelOne PLI-3510 Guía De Instalación Rápida página 5

5. Insert the supplied CD-ROM into your Windows PC, and wait for it to start, select "Utility"from the autorun screen. If
it does not start automatically, locate and run SETUP.EXE
6. Follow the prompts to install the PLI-3510 utility.
7. Once installation is completed, run the PLI-3510 utility program. The first screen (NetworkTab) will display
information of the compatible devices found, such as their MAC Addresses and current transfer speeds. Choose
the desired device from the Device Selection, and the information of the selected device will be displayed in the
table.
8. Click Close to exit the PLI-3510 utility. Setup is now complete. If your PC is not the device you wish to use with the
200Mbps HomePlug AV Adapter, connect the Ethernet cable from the 200Mbps HomePlug AV Adapter to the
desired device
Operation
Operation is completely automatic, and no user intervention is required.
If your HomePlug devices have difficulty communicating with each other, check the following:6

Each HomePlug device must use the same Network Key. You can use the Encryption tab of the PLI-3510 utility to
assign a Network Key to other HomePlug devices.

200Mbps HomePlug AV Adapter works better when plugged into the wall socket. Connect the 200Mbps
HomePlug AV Adapter into the power strip or surge protectors may degrade the network performance.
STEP 2
Installation of Powerline Utility
The Configuration Utility enables the users to identify HomePlug devices on the Powerline network, measures data rate
performance, ensures privacy and performs diagnostics by setting user defined secure Powerline networks.
Users are requested to verify that no other Encryption Management Utilities are installed prior to the installation of this
utility. Other utilities should be uninstalled before installing this utility.
1. In order to install, insert the Configuration Utility CD-ROM into the computer's CD-ROM drive. The program shall
run automatically. Alternatively this can also be done manually by double clicking the autorun.exe file on the CD.
2. For Windows 7 / Vista User only, for Security reasons Windows 7 / Vista requires the installer program to have
administrator privileges so the new policy called " User Account Control " has been introduced in Windows 7 /
Vista. If UAC is enabled Windows pops up a window "User Account Control "Windows need your permission to
continue. User needs to click "Yes / Allow "to continue.
3. Please click "Utility" button to continue. (Figure 1)
4. Click "Setup" button to continue. (Figure 2)
5. Click "Next" button to continue. (Figure 3)
6. Click "I Agree & Next" button to continue. (Figure 4)
7. Click "Next" button to continue. (Figure 5)
8. Click "Close" button to exit. (Figure 6)
9. In order to start the utility, double-click the utility icon on desktop.(Figure 7)
10. You can see your device working well. The top panel of the screen shot shows a Homeplug device connected
locally to your computer. The bottom panel shows one device connected remotely to the computer running the
utility. .(Figure 8)
The Powerline Ethernet Adapter is connected and suitable for Internet Connections.)
- 4 -