Led Indication - Akitio MyCloud Mini Guía De Instalación Rápida

MyCloud Mini
1.6 Detailed View
Label
DC 5V
eSATA
10/100/1000
Reset

1.6.1 LED indication

LED Status
Flashing Blue
Blue
Red
1.6.2 Power ON/OFF Procedure
Connect the power supply to your device first and only then plug it into the wall outlet. The system
starts up automatically as soon as you plug in the power supply. It takes about 1-2 minutes for the
device to go online but the blue system LED will indicate when the system is ready.
To safely turn off the device, press and hold the power button for 3 seconds until the red LED
starts flashing. The system will then shut down all services and about 20 seconds later, it will
power down.
If for some reason the system is unresponsive, press and hold the power button for 6 seconds to
forcefully shut down the system and cut off the power.
Note
If the device is not in use for long periods of time, we recommend that you turn off the device
and remove the power supply from the wall socket.
Description
Power button
Power receptacle
USB 2.0 host port
eSATA host port
Gigabit Ethernet port
System reset button
Security lock slot
Meaning
System is starting up
System ready
System error (unable to start up system)
[2]
Introduction