Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
To mount the hose (8), insert the hose
outlet into the hose connection (19) until
the release buttons click into place.
•
To remove the hose (8), keep the release
buttons pressed and pull the hose outlet
from the hose connection (19).
Mounting and removing the tube
(fig. A)
•
To mount the tube, insert the hose (8) into
the tube (9).
•
To remove the tube, pull the hose (8) from
the tube (9).
Mounting and removing the
accessories (fig. A)
Mounting and removing the suction
nozzle (fig. A)
The suction nozzle (12) can be mounted to
the extension tube (10).
•
To mount the suction nozzle, insert the
extension tube (10) into the suction nozzle
(12).
•
To remove the suction nozzle, pull the
extension tube (10) from the suction nozzle
(12).
Mounting and removing the crevice
nozzle (fig. A)
The crevice nozzle (16) can be used for
vacuuming in narrow and hard-to-reach places.
The crevice nozzle (16) can be mounted to the
hose (8) or to the extension tube (10).
•
To mount the crevice nozzle to the hose,
insert the hose (8) into the crevice nozzle
(16).
•
To mount the crevice nozzle to the
extension tube, insert the extension tube
(10) into the crevice nozzle (16).
•
To remove the crevice nozzle, pull the
crevice nozzle (16) from the hose (8) or the
extension tube (10).
Mounting and removing the upholstery
nozzle (fig. A)
The upholstery nozzle (17) can be used for
vacuuming upholstery, curtains and other
items made of fabric. The upholstery nozzle
(17) can be mounted to the hose (8) or to the
extension tube (10).
•
To mount the upholstery nozzle to the
hose, insert the hose (8) into the upholstery
nozzle (17).
•
To mount the upholstery nozzle to the
extension tube, insert the extension tube
(10) into the upholstery nozzle (17).
•
To remove the upholstery nozzle, pull the
upholstery nozzle (17) from the hose (8) or
the extension tube (10).
Mounting and removing the parquet
floor nozzle (fig. A)
The parquet floor nozzle (18) can be used for
vacuuming on wooden and polished surfaces.
The parquet floor nozzle (18) can be mounted
to the hose (8) or to the extension tube (10).
•
To mount the parquet floor nozzle to the
hose, insert the hose (8) into the parquet
floor nozzle (18).
•
To mount the parquet floor nozzle to the
extension tube, insert the extension tube
(10) into the parquet floor nozzle (18).
•
To remove the parquet floor nozzle, pull
the parquet floor nozzle (18) from the
hose (8) or the extension tube (10).
Use
Unwinding and rewinding the
mains cable (fig. A)
The mains cable rewind button (2) can be
operated by hand or foot.
Before you proceed, we would like you to
focus your attention on the following notes:
-
Do not unwind or rewind the mains cable
while the appliance is switched on.
-
Always hold the mains plug to unwind the
mains cable. Never pull the mains cable.
12
Publicidad
Tabla de contenido
