Danze Cirtangular-Brulée DF024120 Instrucciones De Instalación página 4

2. Line up the mounting template (Z) over the
horizontal line and mark the location of the
mounting bracket holes with a pencil.
3. Drill 5/16" holes for plastic anchors (C) using
5/16" drill bit.
4. Press plastic anchors (C) into the holes until
flush with surface. Use hammer if necessary.
5
5. Install the mounting brackets (D) with the 2"
wood screws (F).
6. Hang the mirrored cabinet (A) and use the
Phillips screwdriver to adjust screws at the top
of mirrored cabinet (A) to level if needed.
7. Install metal shelf holders (H) into the holes
for the side (I) and inner (J) shelves; four hold-
ers (H) are required for each shelf. Install the
side shelves (I) and the inner shelves (J) onto the
holders (H).
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
6