Recharging the built-in batteries / Maintenance of the appliance
Recharging the built-in batteries
Before using the appliance for the first time, we recommend a complete cycle of
recharging the built-in batteries. To recharge the batteries:
1. Insert the adapter into a 220 V, 50 Hz (USA 120 v, 60 Hz) outlet.
2. Make sure that the power switch of the appliance is on OFF. Connect the cable
of the adapter to the appliance and check that light G goes on.
3. Leave the appliance to recharge for 8 hours. Do not leave the appliance
charging unguarded or for a longer period of time than indicated.
4. After a complete recharge, the appliance can be used for 1 hour.
The appliance can also be used while it is recharging. Please also remember that
if the appliance is not used for a prolonged period of time, the batteries automati-
cally lose their charge.
Maintenance of the appliance
·
After each treatment remove the cups carefully and clean them in warm soapy
water.
·
The body of the appliance can be cleaned by wiping it with a soft cloth slightly
dampened with water or an alcohol based solution.
·
The inlet hole of the appliance can be cleaned with a cotton swab.
·
Dry the cups and the appliance thoroughly with a soft cloth or towel before
putting it away.
·
Do not place the appliance where it is exposed to direct sunlight.
·
Do not open the appliance and do not attempt to repair it or alter its
construction.
·
In the case of defects with the appliance or breakage of the adapter or the
power supply cable; please contact an authorized service center.
All manuals and user guides at all-guides.com
61