Product Description; Outside Speakers; Master Station; Introductions - Retekess TW105 Manual Del Usuario

Product Description

1. Auto dual-way intercommunication without pressing any button.
2. External speaker, slim fit design.
3. Anti-interference and noise-free function.
4. Dual-way audio record output.
5. Ideal for the bank, securities, hospital, bus station etc, where guard glass against theft is installed.

Outside speakers

Microphone Microphone
Speaker

Master Station

Inside mute indicator
Inside volume
Inside audio indicator
Inside mute
Power indicator
Audio port Power Port
Microphone jack Record Jack
Extension interface

Introductions

Working voltage / current: DC12V / 0.5A
Output power: 5W + 5W
Microphone
ON/OFF
Speaker
Outside mute indicator
Outside volume
Outside audio indicator
Outside mute
Inside microphone
sensitivity adjustment
Outside microphone
sensitivity adjustment
1
Microphone sensitivity: -46db±2db 20Hz-16kHz
Master station size: 128*98*110mm
Extension size: 130*100*60mm
Outside mute: Turn ON/OFF inside microphone
Outside mute indicator: The indicator lights up when outside mute button is pressed
Inside mute: Turn ON/OFF outside microphone
Inside mute indicator: The indicator lights up when inside mute button is pressed
Record Jack: Standard 3.5mm headphone jack
Microphone jack: Standard 3.5mm Mic jack
Audio port: This function need to be customized

Installation instructions

1. Install the master station in working room,and the substation out of the working room,insert the
substation connector into the Extension jack
2. Insert the transformer into the Power jack
3. Toggle switch of master power to ON, power indicator light will be bright, power is normal working
4. Rotate the volume knob according to requirement
5. When you need to record the internal and external voice in the working room, please insert the
other equipment into master record jack.

Installation

Glass windows

Trouble shooting

Problems Reason
Power supply is unplugged or loose
Master station and
Plugged into the wrong jack
substation are all
silence
The volume of master station and
substation are zero
Installation window with poor
Squeal
sound-proof
The volume of master station is
adjusted too low
The volume of the
master station is
Customer have the longer distance
too low
with the substation
The microphone of master station
does not face to the worker
The volume of the The volume of substation is
substation is too low adjusted too low
Worker have the longer distance
with the master station
Windows
Solution
Re-insert
Plug to the power jack
Adjust the volume of master station
and substation
Keep further distance between the
master station and the substation
Adjust the volume of master station
and substation lower
Adjust the volume of master station
higher by clockwise
Keep the closer distance
Please re-calibration
Adjust the volume of substation
higher by clockwise
Keep the closer distance
2