V-TAC VT-77 Instrucciones De Instalación página 3

STRUCTURE AND SIZE
NOTES
1. This production is a solar energy product. When installing, the solar panels of the
product must
be illuminated in the direction of the sun. If not placed in the direction of the sun the
lamp will not function properly. Resulting in the lamp to no switch ON or the light is
functions for a short period of time only. Solar panel should be placed in the direction of
the sunlight. The performance of the light is the best if the illumination time of the
sunlight is longer than 6 hours resulting in the light to be turned on for its maximum
time.
2. This product is mainly installed on the wall and is not allowed to be used in damp or
immersed
places. Otherwise, it will have a breakdown and affect its service life.
3. The product can achieve the expected brightness and light-up time when the battery
is full of
electricity. Such as overcast and rainy days, which will cause insufficient charging and
shorten the
light-uptime. If the lighting time is not long on sunny days, please check whether the
solar panels
are exposed to the sun for a long time. Or whether the solar panel is dirty and dusty,
ensure to keep the solar panels clean.
4. LED Solar light is designed with a replaceable battery. It should be replaced after 3
years of use.
After removing the wire connection from the original lithium battery, the battery will be
removed and replaced with the new battery of the same specifications.
EN SOLAR LIGHT
14. Column
15. Fixing Frame
1. Solar Panel
2. Fixing frame
3. Waterproof silicone
rubber ring
4. Litihium battery
5. LED and battery
fixing box
6. Control panel
7. Switch button
8. LED
9. Fixing base
10. PC Cover
11. Fixing Side Base
12. Fixing
Bracket
13. Screw