Intellinet IPS-52GM04-10G-400W Manual Del Usuario página 3

48-Port Gigabit Ethernet PoE+ Layer2+ Managed Switch with Four 10G SFP+ Uplinks
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of
the switch to a power outlet, and confirm that the Power LED lights.
LED
PWR
SYS
1–48
49S–52S
(SFP)
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address field.
The default management IP address is 192.168.1.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Color
Green
Blinking
Green
10/100M: Orange;
Blinking
1000M: Green
1G: Orange;
Blinking
10G: Green
Status
On
Off
System is booting or has booted successfully.
Off
On
Data transmitted/received.
Off
On
Data transmitted/received.
Off
Operation
Unit is receiving power.
Check connection.
System not started.
Valid port connection.
No link established.
Valid port connection.
No link established.
Instructions
3
English