Tabla de contenido
Publicidad
MIXER, USB/SD DIGITAL MEDIA PLAYER
1. PLAY/PAUSE
Plays or pauses the track.
2. STOP
Stops playback of the track.
3. V+
Press and hold this button to increase the track
volume.
4. V-
Press and hold this button to decrease the track
volume.
5. PREVIOUS TRACK:
Selects the previous track.
6. NEXT TRACK
Selects the next track.
7. REPEAT
Press this button to cycle through the Repeat
Mode options: Random, Single, All.
8. EQ
Press this button to cycle through the digital
equalization presets that you can apply to
the track: Pop, Rock, Jazz, Classic, Normal.
(Equalization is applied only to MP3 file playback
on a connected USB flash drive or SD card, not to
other audio sources or inputs.).
9. MODE
Selects the media source: a USB flash drive or an
SD card.
IMPORTANT
To use the controls described below you must have
a USB flash drive connected to the USB port or an
SD card connected to the SD card slot.
TO ACCESS AN INSERTED SD CARD OR USB
FLASH DRIVE:
A. Hold the Mode button for 2 seconds to turn
the display on (if it is not already).
B. Press and release the Mode button to select
the SD card or USB flash drive.
C. Use the Previous Track and Next Track buttons
to scroll through files and press Play to hear
the file.
D. Use the V+ and V- buttons to adjust the
volume of the source.
1
2
3
BLUETOOTH CONNECTION
To connect a Bluetooth device to the speakers
digital media player, please follow the below steps.
• Ensure that the speaker is powered on and within
range of the Bluetooth device.
• Press the MODE button on the speaker's digital
media player until 'Bluetooth' is displayed on the
screen.
• Open the Bluetooth settings on the Bluetooth
enabled device.
• Scan for Bluetooth devices and search for 'SZPA-
410, SZPA-612 & SZPA-815' in the devices list.
• Select 'SZPA-410, SZPA-612 & SZPA-815'. The
Bluetooth enabled device should confirm that it is
now connected.
• Play audio from the Bluetooth enabled device,
ensuring that volume is turned up.
7
4
5
6
7
8
9
Publicidad
Tabla de contenido
