Lagrange Popp'y Modo De Empleo página 15

uK stYle PluG WiRinG instRuCtions
(in tHe uK onlY) ___________________________
This product must only be used from a 13 amp power socket.
If a BS1363 approved 13 amp plug is used, it should be fitted with
a 13 amp fuse. The wires on the power cord are colour coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or in
black.
The brown wire must be connected to the terminal marked L or
coloured in red.
The green (& yellow) wire must be connected to the terminal
marked E or coloured in green (& yellow).
imPoRtAnt inFoRmAtion ___________________
This appliance is not for professional use. You should follow the
requested breaks. Failure to follow this instruction carefully may
result in damage to the motor.
Please refer to the rating label for the maximum continuous usage
time (KB/MAX xx min. or xx is the maximum usage time). The breaks
should last at least 10 minutes.
oPeRAtinG instRuCtions ___________________
Measure popping corn using the corn measure (one full measure
per popping session).
Pour popping corn into the Aluminium Heat Chamber.
Attach popping chute (head) to top of base. Make sure popping
chute sits snugly in top of base.
Place a large bowl under spout so edge of bowl is touching body
of machine. It is important that the popped corn being ejected
down the chute into the bowl is not re-directed, blocked or
otherwise interfered with, since the popped corn is hot and
premature contact may cause minor discomfort.
If desired, fill butter tray (hat) with margarine or butter and place
on top of popping chute, butter side up. The heat generated to
pop the corn will also melt the butter for adding to your popcorn
in the bowl beside the popcorn maker.
DO NOT add the butter to the corn in the popcorn maker. This
will destroy the appliance and may invalidate any claim. If melted
butter is not required place the empty butter tray on top of the
popping chute before use.
Switch machine to ON. After a few moments the continuous
popping action will automatically feed corn into heat chamber
until all has been popped.
Turn machine OFF when popping has stopped. There will usually
be 10 to 20 unpopped kernels in heat chamber at the end of
popping cycle.
Allow appliance to cool down before packing away after use.
WARninG: this is not a toy ! please do not leave children
unsupervised with the appliance during operation, when it is
hot or connected to electricity.
14