b) Press t / u button to select "Device List" and press the
"ENTER" button to the sub menu.
Trouble Shootiing
Before consulting service personnel, check the following chart
for possible solutions.
PROBLEM
TV will not turn on
No picture, no sound
Poor picture, sound OK
Audio noise
USER'S ManUaL
c) Press t / u button to select "Scheduled Record" and press
the "ENTER" button to set.
note:
1. The U disk will be formatted when in format, please do not
store important files in the U disk.
2. Press "
the second time, the sign of recorder will be slimmed down, but
it's still under recording.
SOLUTION
Make sure the power cord is plugged in.
The batteries in the remote control may be
Exhausted; replace the batteries.
Check the cable between TV and antenna/ external AV device.
Press the power button on the remote.
Press the SOURCE button the remote, then press the / button repeatedly
to select the TV source.
Check the cable between TV and antenna/ external AV device.
Try another channel, the station may have broadcast difficulties.
Adjust the brightness/contrast in the Video menu. Check that the unit is set to
PAL
Move any infrared equipment away from the TV.
21
" button for the first time to start recording, for