Descargar Imprimir esta página

NEC MultiSync ME431 Manual De Configuración página 11

Ocultar thumbs Ver también para MultiSync ME431:

Publicidad

Connecting to a TV*
• Cable distribution system should be grounded (earthed) in accordance with
ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93,
Grounding of Outer Conductive Shield of a Coaxial Cable.
• The screen of the coaxial cable is intended to be connected to earth in the building
installation.
*1: The product you purchased may not have this feature.
3. Connect the supplied power cord
WARNING: Please refer to the "Important Information" section for proper selection
of an AC power cord.
CAUTION: Please refer to "CAUTION 1".
NOTE: • The monitor should be installed close to an easily accessible power outlet.
• Please make sure that enough power is supplied to the monitor. Please
refer to the "Power Supply" in the specification (See User's manual).
Screw
Clamp
4. Cable information
CAUTION: Use the provided specified cables with this product so as not to interfere
with radio and television reception.
For USB, please use a shielded signal cable with ferrite core.
For HDMI and DisplayPort, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and
television reception.
1
English-9
EN

Publicidad

loading

Este manual también es adecuado para:

Multisync me501Multisync me551Multisync me651