Phase Linear PCD161A Manual Del Usuario página 10

OPERATING INSTRUCTIONS
Display Selector (DISP)
10
This unit can display either the clock time or
radio frequency/CD player functions.
Depending on your System Menu settings (see
"System Menu"), the radio frequency, CD player
track indication or clock may be displayed.
Press the DISP button (10) to change between
Frequency/CD information and clock display.
Setting the Clock
To set the clock, perform the following steps:
1. Turn the vehicle ignition and radio on.
2. Press and hold the DISP button (10) until the
time display flashes.
3. Within 5 seconds, press the volume + button
(3a) to adjust the hour.
4. Press the volume – button (3b) to adjust the
minutes.
Five seconds after the last hour or minute
adjustment has been made, the time will set
and normal operation will resume.
10
PCD161A