Publicidad
Idiomas disponibles
Idiomas disponibles
XS 1010 PRO
1. GENERAL APPLICATIONS:
The XS 1010 PRO headset microphone is ideally suited for vocal sound and speech
application which requires much freedom of movement.
A built-in windscreen reduces wind and blowing noise and an external windscreen for additional
wind noise attenuation is included with the microphone.
Miniature gooseneck as the microphone arm can be moved to all directions.
2.SAFETY NOTES:
*Suitable for indoor use only. Protect it against dripping water and splash water,
high air humidity, and heat( admissible ambient temperature range 0-40°).
*For cleanly only use a dry, soft cloth, by no means chemicals water.
*No guarantee claims for the microphone or liability for any result personal damage
or material damage will be accepted if the microphone is used for other purposes
than original intend, if it is not correctly connected or not repaired in an expect way.
3.HOW TO USE:
1) Put on the microphone and place the mi crophone cartridge close to the mouth
into a favorable talk position. For this purpose this microphone arm can be
moved in all the directions.
2) Connect the mini XLR inline jack of the microphone cable to the input jack of
the pocket transmitter or power supply adaptor, when using a power supply
adaptor, connect it to the microphone input of an audio unit.
4.SPECIFICATIONS:
Element:
Polar pattern:
Frequency Response:
Sensitivity:
Output impedance:
SPL max:
Power Supply:
Cable:
Weight:
Output connector:
Accessory:
Frequency Response Curve and Pick-up Character:
Headset Microphone
Back electret condenser
Uni-directional
50Hz~20KHz
-45±3dB
<1000 Ω
120 dB
9- 52V D.C.
ø 2mm*1.2m
42 g
2.5mm plug
Windscreen, Mini XLR adaptor
0°
330°
30°
300°
60°
270°
120°
240°
150°
210°
180°
90°
Publicidad
