Moshi ionbank 3K Guia De Inicio Rapido página 2

Quick Start Guide
Charging
Plug the Lightning connector into your iOS
device and press the status button to charge.
LED Status: Green: 50-100% Orange: 20-50%
Red: 0-20%
Green: 50-100%
Orange: 20-50%
Red: 0-20%
Recharging
Plug the USB connector into a wall charger,
car charger, or computer to charge. (For faster
recharging, use a 2.4-amp high-output charger.)
SmartSense
SmartSense circuitry prioritizes charging your
iPhone rst, and then funnels the remaining
current to recharge your IonBank at the
same time.
IonBank also features sync
pass-through to back up
your device to a computer.
Wall charger
Car charger
Important Notes & Instructions
• Do not open, disassemble, puncture or modify
your IonBank in any way. Doing so not only voids
the product warranty, but could also result in re,
electrical shock, serious injury and/or property
damage.
• To prevent a short circuit or other potential
hazard, keep any foreign metal object away from
IonBank's ports and connectors.
• It is normal that IonBank may be warm to the
touch during usage. However, if the product
becomes hot to the touch, starts to expand or
swell, or emits strong odor, discontinue use
immediately and contact Moshi to have the
product examined.
• Keep IonBank away from heat sources such as
thermal vents, re, and strong direct sunlight. To
prolong the life of IonBank's power cells, do not
store IonBank at elevated temperatures (over
80°F or 27°C).
• Charge cycle e ciency may vary depending on
device model and other factors such as ambient
temperature.
• Use only certi ed cables to charge your
smartphone and tablets. Non-compliant cables
may not perform as expected.
• To charge IonBank, use the internal USB cable
and plug into any powered USB port on a
computer or USB power adapter. You may use a
12W USB power adapter for faster charging.
• Do not dispose your IonBank as household waste.
For more information on how to recycle this
product, please contact your city government or
local recycling center.