Operation - Airthereal MA10K-PRO Manual De Usuario

OPERATION

Choosing a location
1. Place the unit at least 15 inches away from TVs, radios, and other electronic products.
Make sure there's plenty of space for Ozone to be exhausted from the machine.
2. Before beginning ozone treatment, thoroughly clean up the source of the odor first.
DISCLAIMER:
Please make sure the operating voltage is the same as shown on the parametric label.
This unit will not function properly using in conjunction with external devices that alter
or convert voltage or frequency of electricity.
Getting Started
1. Insert the power cord into an electrical outlet.
2. Close all windows and doors to completely seal the room. Please note that all ozone
machines have to be used in unoccupied space only.
3. Turn the knob to set a timer or enter the HOLD mode to run continuously. The unit
will start immediately producing ozone, so you should exit the room as quickly as
possible.
Features
Timer: Turn clockwise to set the timer up to 120 minutes. The unit will automatically
power off when the timer expires.
Hold: Turn counterclockwise to run continuously. Return the knob to 'OFF' when
treatment is finished.
Treatment Duration Chart
Area 200 sq.ft. 300 sq.ft. 500 sq.ft. 700 sq.ft. 1000 sq.ft. 1500 sq.ft. 2000 sq.ft.
Time 10 min 15 min
Treatment Frequency
Depends on your needs. At least once a week to keep fresh air indoors.
ATTENTION: Use in unoccupied space only!
There might be an ozone smell remaining in the room after treatment. Open doors and
windows to ventilate for at least 30 minutes (or longer according to your treatment time
and room area) after the treatment and before returning to the space.
Storage
If you are not going to use the product for an extended period of time, unplug it from the
electrical outlet, clean it and store it in a cool and dry place away from direct sunlight.
30 min 45 min 60 min 90 min Hold
7