Zones Of 80 Memory - Healthy Living Premium Deluxe Thinline BSP-4007 Manual Del Usuario

Storing, recalling, and erasing
measurement data
Erasing data
a. Press "MEM" into Memory mode.
b. Press and hold on "MODE" button and then press " " button, the pre-
set Personal Alert Level and all measurement data will be erased.
* To confirm the data has been erased, press the "MEM" button and
no data should appear.

3 Zones of 80 Memory

When you take a measurement, the monitor automatically stores it
in memory space number one. As you continue to take measure-
ments, the monitor will push the previous measurement back one
space. In other words, the value in space one will always be the
most recent blood pressure measurement taken.
Your monitor features a 3 party memory capability or 3 "zones" - each
zone stores 80 measurements each for a total capacity of 240 measure-
ments. This feature is useful for a user to track their blood pressure
throughout the various periods of the day: morning, afternoon, and night.
Press the " " button to toggle between memory zone No.1, 2, and
3. Once you select a zone that you want to view the measurements
in, press the "MEM" button once to view the most recent measure-
ment along with the time and date that it was taken. Press the
"MEM" button again in succession and you will see all of the mea-
surements registered to that zone. You can then press the " " but-
ton to switch to the next zone to view measurements. The monitor
will automatically power off after about one minute of inactivity.
* When taking measurements, be sure and select the correct zone
number using the SET button so that the measurement is registered
to the appropriate zone.
Storing, recalling, and erasing measurement data/3 Zones of 40 Memory
All manuals and user guides at all-guides.com
21