Setting and Displaying the Current Time
Setting the Sleep Timer
Press the SLEEP button on
the remote control repeatedly
until the appropriate time
interval appears.
You can set the TV's clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
1.
Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER button.
2.
Press the
or
button to select "Time", then press the ENTER button.
3.
Press the ENTER button to select "Clock Set".
4.
To...
Move to "Hour" or "Minute"
Set the "Hour" or "Minute"
Press the ENTER button.
5.
Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
You can select a time period of between 30 and 180 minutes after which
the television automatically switches to standby mode.
1.
Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER button.
2.
Press the
or
3.
Press the
or
ENTER button.
4.
Press the
or
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.
5.
Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
English-14
button to select "Time", then press the ENTER button.
button to select "Sleep Timer", then press the
button repeatedly until the desired time appears
or
button to
Press the...
or
button.
or
button.
or
button to