WARMWAVE HPQ15-M El Manual Del Propietario página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. To disconnect the heater, turn control to OFF, then remove the plug from the outlet.
11. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage to the heater.
12. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft
surfaces, like a bed, where openings may become blocked.
13. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint,
or flammable liquids are used or stored.
14. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, injury to persons, or other damage to property.
15. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.
16. To prevent overload and blown fuses, be sure that no other appliance is plugged into the same
outlet (receptacle) or into another outlet (receptacle) wired into the same circuit.
17. It is normal for the heater's plug and cord to feel warm to the touch. A plug or cord which
becomes hot to the touch or becomes distorted in shape may be a result of a worn electrical
outlet. Worn outlets or receptacles should be replaced prior to further use of the heater.
Plugging heater into a worn outlet/receptacle may result in overheating of the power cord or fire.
18. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of
fire. However, if you have to use an extension cord, the cord should be No. 14 AWG minimum size
and rated not less than 1875 watts, and has to be used only for supplying power to this heater.
19. Be sure that the plug is fully inserted into appropriate receptacle. Please remember that
receptacles also deteriorate due to aging and continuous use: check periodically for signs of
overheating or deformations present in the plug. Do not use the receptacle and CALL your
electrician.
20. Check that neither the appliance nor the power cable has been damaged in any way during
transportation.
21. Make sure that no pieces of polystyrene or other packaging material have been left between
elements of the appliance. It may be necessary to clean the appliance.
22. Connect to properly polarized outlets only.
23. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS.

Publicidad

Tabla de contenido
loading

Tabla de contenido