Publicidad
Idiomas disponibles
Idiomas disponibles
EN
This manual contains important information that should be kept for
future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Dimensions
Mod. A:
Dimensions of bed unfolded: 200 x 95 x 205 cm.
Dimensions of bed: 195 x 140 cm.
Mod. B:
Dimensions of bed unfolded: 220 x 95 x 210 cm.
Dimensions of bed: 195 x 160 cm.
Material
Cover: 100% polyester.
Backrest, armrest padding: polyurethane foam 21 kg/m
240 g/m
2
.
Seat padding: polyurethane foam 30 kg/m3, 18 kg/m
wadding 240 g/m
2
.
Lumbar cushion padding: fiber
Structure: hardboard, particle board, solid birch (Betula Pendula ;
origin: Russia) and plywood.
Mechanism: steel.
Seat suspension: elastic straps and springs.
Bed base: electro-welded metal.
Mattress padding: polyurethane foam 30 kg/m
Mattress thickness: 14 cm.
Feet: polypropylene and solid beech (Fagus Sylvatica;
origin: Romania).
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
The transformation into bed is realized with a single motion without
moving the seat cushion and backrest.
Do not make changes in the metal mechanism.
Danger of pinching/squeezing when folding/unfolding.
During the first use of the convertible, remove the mattress
protective plastic to prevent the compressed air hinders the proper
functioning of the mechanism when folding the mattress. During
closing of the bed properly position the mattress whose movement
could damage the mechanism.
Do not leave pillows or duvet in bed couch position.
It is recommended to lubricate all mechanical parts to avoid the
creaking of springs, levers or joints etc ...
Romain - 06/2021
Maintenance
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry dabbing
to absorb the liquid. Do not rub, it may damage the fabric. Variations
in color between the surfaces cleaned and uncleaned might appear.
Avoid direct and prolonged exposure of the product to sunlight. The
colors may fade.
Do not place the product near a heat source (radiator, fireplace...) nor
a moisture source. The heat and humidity can damage the product.
Do not use abrasives.
Turn and pat the seats, backrests and armrests regularly so that they
do not wear out and do not become unevenly dirty.
Hand cleaning is recommended for the seat cushion covers.
If in doubt, call a professional to carry out cleaning.
3
, wadding
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
3
and
nearest store or contact us on our website at: www.habitat.eu or
write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
3
.
1
Publicidad
