Hardware Installation - Encore electronics ENM232-6CMI Manual De Usuario

Hardware Installation

NOTE: Before you start the hardware installation, make
sure that Windows Operating System is properly
installed to your computer.
Follow these steps carefully
1. Turn off your computer and disconnect the PC power
cord
2. Remove the case cover of your computer. Refer to
your PC's user manual for more details.
3. Insert the Sound Card into any free 32-bit expansion
PCI slot and make sure it is properly screwed in and
secured.
4. Put the computer PC case cover back on and
reconnect the PC power cord
5. Turn on your computer, and then follow the
Installation
All manuals and user guides at all-guides.com
to complete.
Driver
Page 5