ASROCK FM2A55 Pro Manual De Instrucciones página 27

®
STEP 3: Install Windows
your system.
Use the option "Easy RAID Installer" in UEFI setup utility to copy the RAID drivers
to your USB fl ash disk. Insert the Windows
boot your system, and follow the instruction to install OS on your system. When you
see "Where do you want to install Windows?" page, please insert your USB fl ash
disk to your system, and click the "Load Driver" button to load the RAID drivers.
After that, you can continue the OS installation.
2.11 Installing Windows
TM
Vista 64-bit Without RAID Functions
If you want to install Windows
your SATA2 HDDs without RAID functions, please follow below steps.
Using SATA2 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Confi guration.
B. Set the "SATA Mode" option to [IDE].
®
STEP 2: Install Windows
your system.
Using SATA2 HDDs with NCQ and Hot Plug functions (AHCI mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Confi guration.
B. Set the "SATA Mode" option to [AHCI].
®
STEP 2: Install Windows
your system.
ASRock FM2A55 Pro Motherboard
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
OS optical disk into the optical drive to
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
Advanced screen
8 / 8 64-bit / 7 / 7 64-bit / Vista
Advanced screen
8 / 8 64-bit / 7 / 7 64-bit / Vista
TM TM
/ Vista 64-bit OS on
TM
/
TM TM
/ Vista 64-bit on
Storage
TM TM
/ Vista 64-bit OS on
Storage
TM TM
/ Vista 64-bit OS on
27