Wiring; Troubleshooting - LEGRAND C2G C2G41601 Manual Del Usuario

4-Port HDMI Distribution Amplifier Splitter - 4K 60Hz

Wiring

Warnings:
Before wiring, disconnect the power from all devices.
•
During wiring, connect and disconnect the cables gently.
•
Steps for device wiring:
1. Connect HDMI IN
Connect an HDMI source device to HDMI IN of the splitter using a high-quality
HDMI cable (e.g. PC, Blu-ray player, Apple TV, STB, etc.).
2. Connect HDMI OUT
Connect HDMI display devices to HDMI OUT (1-4) of the splitter (e.g. TV,
projector, LCD/LED display, etc.).
3. Connect the power supply provided to the splitter.
4. Power on all attached devices.

Troubleshooting

Steps for Regular Troubleshooting
1. Power: Ensure the source, display devices and splitter are powered on.
2. Indicator: Ensure all LED indicators of the splitter are normal according to user manual.
3. Devices: Ensure picture can be shown normally when connecting source to display device directly.
4. Cable: Plug in and out the HDMI cable or try another HDMI cable. Ensure the specific cable length is
within the available transmission range according to Features section.
5. Compatibility: Please test other source and display devices to determine if it is a compatibility issue.
4
(us)