Publicidad
Step 5
Attach the clear surface protecting strips to the
bottom edges of the glass
Step 6
Carefully pour in the liquid ethanol fuel using a funnel and fill
approximately ¾ full or until you just start to see the fuel come over the
perforated metal holes inside the burner. Check for any spillage. If any
fuel has spilled anywhere or, you should always wipe it up and
remove cloth used before lighting your fireplace. You will
notice a white fiber material in your burner. Do not remove
this. It is a fiberglass material safe to burn and is intended to
be there for safety and better flames.
Step 8
Using a long lighter or long match, light the fuel in the burner
and ENJOY!
CAUTION: Fireplace will be hot while lit and may stay
hot for a while after extinguishing the flame.
ALWAYS USE CAUTION when lighting the fireplace.
Never fill the burner with more fuel while the fireplace
is still hot or burning. Allow it to cool down before
refilling with fuel.
Step 9
To extinguish your fireplace, place the circular end of the burner
handle flat over the burner. Hold it there for at least 10 seconds.
This should completely snuff out the flame but always double
check there is NO flame before refilling or leaving unattended.
MAKING ANY MODIFICATIONS TO THIS FIREPLACE IS FORBIDDEN.
ALWAYS FOLLOW ALL OF THESE INSTRUCTIONS. FAILURE TO DO SO CAN BE EXTREMELY DANGEROUS.
Publicidad
