Eldom Robo R110 Manual De Instrucciones página 10

- Before the operation make sure that all the components were assembled properly.
- Plug in the appliance.
- The mixer starts its operation after a proper speed is selected with the switch (2).
- By changing its position 5 different speeds can be obtained.
- TURBO button is used to achieve immediately the maximum speed corresponding to
the position "5" of the switch (2).
- When whisking or mixing is finished, one should:
- Slide the switch (2) to "0" position and unplug the mixer.
- Pull the attachments from the sockets by pressing the button (1).
CAUTION
Watch the continuous operation time of the appliance. The extended operation time and
the lack of breaks may lead to the irreversible damage to the engine and loss of warranty.
In the case of stopping the appliance while operation, before cleaning, unplug it and wait
till the attachments stop to whirl.
If the appliance slows down while operation it needs a break and, if possible, liquefying
ingredients.
CLEANING AND MAINTENANCE
Before cleaning, unplug the appliance.
Do not wash the appliance in a dish-washer machine.
Do not immerse the body (4) in water.
Clean with a damp cloth or towel.
Other components of the appliance can be washed in warm water with a dishwashing
liquid.
Do not clean the appliance with sharp, abrasive cloths or sponges as it may destroy the
appliance.
PROTECTION
- The appliance is made of materials which can be recovered or recycled.
- The appliance should be handed over to the appropriate centre of collection and
recycling of electrical and electronic equipment.
WARRANTY
- The appliance is intended for personal use at a household.
- It is not intended for professional purposes.
- In case of misuse, the warranty is rendered null and void.
10