Goobay 51279 Instrucciones De Uso página 2

EN User Manual
AC power strip with surge protection and switch
1 Safety instructions
The user manual is part of the product and contains important information for correct use.
• Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Do not insert any objects into ventilation slots or connection sockets!
Voltage-free only when the plug is pulled out.
• In case of emergency, after use and during thunderstorms, pull the mains plug out of
the socket directly at the plug housing.
• Do not short-circuit connectors and circuits.
Kinked connection cables increase the risk of electric shock.
• Always unwind the connection cable completely.
A defective device must not be put into operation, but must be secured against unintenti-
onal further use.
• Only use the product, product parts and accessories if they are in perfect condition.
• Avoid extreme loads such as heat and cold, wetness and direct sunlight, microwaves
as well as vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, malfunctions and other problems
that cannot be solved by the accompanying documentation, contact the dealer or ma-
nufacturer.
• Installation, disassembly, maintenance and repair work may only be carried out by-
qualified electrical specialists.
• Compare technical data of product, power supply and peripheral devices. They must
be identical.
• Use only in dry conditions.
• Do not plug in one after the other.
• Never touch the power plug with wet hands.
• Do not operate covered.
• Do not operate in potentially explosive atmospheres.
Risk of injury from tripping and falling.
• Make sure that the connection cable is laid in such a way that it does not obstruct an-
yone and is not damaged.
Do not overload the power strip.
• Observe the max. permissible load capacity in the "Technical data" chapter.
Not suitable for children. The product is not a toy!
• Secure packaging, small parts and insulating material against accidental use.
2 Description and function
2.1 Product
The product is a power strip with surge protection and switch for charging and operating
small mobile devices and extension cords for home use.
○ With illuminated ON/OFF switch
○ Angled grounding plug for space-saving use
2.2 Scope of delivery
AC power strip with surge protection and switch, User Manual
2.3 Operating Elements
1 Hybrid connector
2 ON/OFF switch
3 Protective conductor indicator (LED)
2.4 Specifications
Article number
Color
Connection type 1 6x Protective contact socket (Typ F, CEE 7/3)
Connection type 2 1x Hybrid connector (Typ E + F, CEE 7/7)
Rated voltage / current
Max. permissible load
capacity (W)
Power cord type
T3, Uc= 255 V
Overvoltage protection
6.0 kV (L/N-PE), Up: 2.0 kV (L-N, L/N-PE)
Mains cable length (m)
Protection class
Protection level
Dimensions (LxWxH)
[mm]
Weight (g)
REV2021-08-27
V1.1cl
Subject to change without notice.
4 Overvoltage protection indicator (LED)
5 Protective contact sockets
51279
white
250 V 50 Hz, 16 A max.
3500
H05-VV-F3G 1.5 mm²
50 Hz, Uoc = Uoc: 3.0 kV (L-N) /
1.4
I
IP20
360 x 52 x 42
482
3 Intended use
We do not permit using the device in other ways like described in chapter
"Description and Function" or in the "Safety Instructions". Use the product only
in dry interior rooms. Not attending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.
5 Connection and operation
1. Connect your household appliances to the power strip.
2. Connect the power strip to an easily accessible grounded socket.
3. Switch on the power strip by pressing the ON/OFF switch (2).
An audible "click" sound is heard and the ON/OFF switch (2) lights up red.
The overvoltage protection is active when the overvoltage protection indicator (4) lights
up.
The overvoltage protection indicator (4) lights up as soon as voltage is present.
4. Disconnect all cable connections after use or turn the ON/OFF switch (2) off by pres-
sing it.
If the ON/OFF switch (2) is switched off, all protective contact sockets are disconnected
from the mains.
The protective conductor indicator (3) shows that the protective conductor is intact. If it
does not light up, there is no protective conductor function. In this case, the power strip
is defective or there is a fault in the house installation.
6 Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE! Material damage
• Always disconnect the mains plug from the socket before cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambien-
ce when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
7.1 Product
According to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to
the producer, the dealer, or public collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol on the product, in the user
manual, or at the packaging alludes to these terms. With this kind of waste separation,
application, and waste disposal of used devices you achieve an important share to
environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection points – pa-
per belongs in paper bins, plastics belong in yellow sacks and glass belongs in
used glass bins.
DE4535302615620
8 EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH
ensures, that the product is conformed to the basic European standards and
directives.
9 Symbols used
For indoor use only
Alternating current
Recycling
Protective earth; protective ground (Class I equipment)
- 2 -
IEC 60417- 5957
IEC 60417- 5032
ISO 7001 - PI PF
066
IEC 60417- 5019
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
51279
Goobay®