Product Specifications; Application; Set-Up And Operation; Caution - VWR 8611L Manual De Instrucciones

Product specifications

Model
Lens material
Magnification
Diopter
Lens size
Currant
Voltage
Frequency
Lamp
Lamp lifetime

Application

Biological and clinical laboratories, electronics, chemical industries, publishing and printing, stamp
collecting, alloy or jewellery manufacturing plus reading.

Set-up and operation

1. Before using, please remove all packing from around the lamp.
2. Put the plug into a conveniently located electrical socket - the lamp is now ready for use.
3. Switch on using the On/Off switch located on the base.
4. To place the magnifying lens in the desired position simply grip both side of the head and move it as
necessary. The adjustable arm has been designed to hold the head in any position you want.

Caution

1. Only suitable for indoor use.
2. When the lamp is replaced the cover must be fixed or operation cannot proceed.
3. Never leave the lens in direct sunlight or where light can shine through it as this may cause a fire
hazard.
4. If the external cable or lamp is damaged, only the manufacturer or a qualified person should replace it.
5. If the lamp is broken and needs to be replaced, order it from your distributor or the manufacturer.

User replaceable accessories and spare parts

Model 8611L - replacement LED: Cat. No. 630-1964
Model 8611AL - replacement LED: Cat. No. 630-1964
Model 8612AL - replacement LED: Cat. No. 630-1965
8611L & 8611 AL
Acrylic
1.75x – 3x bifocal lens
3/8 diopter acrylic lens
9 cm
200 mA
100 – 230
50 – 60 Hz
60 LED, 3.5 W
20 000 h
5
8612AL
Acrylic
1.75x – 3x bifocal lens
3/8 diopter acrylic lens
10 cm
200 mA
100 – 230
50 – 60 Hz
40 LED, 2.5 W
20 000 h