Beper BF.720 Manual De Instrucciones página 11

EN
Double induction cooker Use instructions
Operation
Place the product on a flat and stable surface, leaving adequate space on the sides of the product.
Place a suitable cooking container in the centre of the cooking area and place the food inside the container.
Connect the plug to the electrical socket: the appliance will emit a sound and the "C" symbol will appear on the
display.
Press the ON / OFF button on the control panel, the word "ON" will appear on the display.
Power setting
Touch the "Function" button on the panel once. The appliance switches on, the display shows "1600W 'for the
large plate and/or "1300W " for the small plate.
With the "+" and "-" keys you can adjust the desired power from 200 to 2000W for the large plate and from 200
to 1500W for the small plate.
At the end of cooking touch the ON/OFF button to switch off the appliance.
Timer after power setting
Press "Timer" during cooking. The "timer" indicator lights up, and "0:10" flashes on the display.
Use the "+" and "-" keys to set the cooking time, from 0 to 4 hours.
For a few seconds the display will show the set cooking time.
The display shows the selected power and the remaining time.
Cooking will stop when the set time has run out.
Cooking with temperature adjustment
Press the "Function" button 2 times. The appliance switches on, the display shows "180 C".
Set the desired cooking temperature with the "+" and "-" buttons. There are 10 adjustable levels ranging from
60°C to 240°C.
Timer after temperature setting
Press "Timer" during cooking. The "timer" indicator lights up, and "0:10" flashes on the display.
Use the "+" and "-" keys to set the cooking time, from 0 to 4 hours.
For a few seconds the display will show the set cooking time.
The display shows the selected temperature and the remaining time.
Cooking will stop when the set time has run out.
Key lock
To lock the keypad of the control panel press the "Lock" button for a few seconds during use.
The "Lock" button light comes on to indicate the lock.
To unlock, press the "Lock" button again for a few seconds.
Security systems
The appliance switches off automatically if there is no cooking container, or it is removed, or is a material not
suitable for induction cooking.
In this case the product will beep for about 60 seconds, and then it will go into stand-by mode.
Each time the product is turned off with the ON/OFF button, the fan will continue to run for about 30 seconds, so
as to cool every part of the appliance.
To turn off the product always use the ON/OFF button, do not turn it off by removing the cooking pan.
11