Publicidad
LED Strobe Mode
st
Manual output for 1
of LEDs
Manual output for 2
nd
of LEDs
rd
Manual output for 3
of LEDs
th
Manual output for 4
of LEDs
MASTER/SLAVE MODE
For connecting multiple units. Connect the lights in the desired series, and put the first light into the desired Auto
mode. Put the remaining lights in slave mode (IP.01). The slave lights will follow the master.
DMX
This light is able to receive a DMX512 Signal and uses 8 channels. Connect the DMX connector to the input
marked DMX IN and connect the output to the next lights input. It is recommended that you do not connect more
than 10 lights at once.
A4.01-A4.04 (flashing)
A5.01-A5.19
A5.01-A5.32 (flashing)
group
r000-r255
group
g000-g255
group
b000-b255
group
u000-u255
Sets sound sensitivity from 1 to 4.
Selects strobe output pattern. The selected pattern
stays lit and the remaining lights flash.
Selects the strobe speed from 1 to 32.
Selects group 1 dimming from 0 to 100%
Selects group 2 dimming from 0 to 100%
Selects group 3 dimming from 0 to 100%
Selects group 4 dimming from 0 to 100%
Publicidad
