Descargar Imprimir esta página

Gear4music STELLAR-66 Manual Del Usuario página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING!
Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel
Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust,
mechanical vibration or shock
The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
product
No naked flame sources, such as lighted candles, should be placed on the product
Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up. The ventilation must not be
impeded by covering the appliance with items such as newspapers, table-cloths, curtains etc.
This appliance incorporates a replaceable fuse that can be accessed without opening the appliance cover. Disconnect the mains
supply before attempting to replace the fuse, and replace with one of the same type and rating
This appliance must be earthed
The mains plug is used to disconnect the appliance from the mains supply. Ensure that the mains outlet is easily-accessible and
remove the plug from the mains outlet if you notice any abnormality with the appliance.
IMPORTANT LASER WARNINGS!
This device is equipped with CLASS 3R lasers, and is for laser light shows only.
This device should be operated by a trained professional only.
Do not shine the laser into audience areas where the audience or other personnel could be exposed to direct or reflected laser
light.
This device must be out of reach during operation: install the device higher than 3m from the ground, and at least 3m from an
audience.
Do not direct the laser beam at people or animals.
Do not direct the laser beam at aircraft.
Do not leave the unit running unattended.
Avoid direct eye contact with the laser during operation, especially when the laser beams are static.
This device is equipped with a key switch. The laser operates when the key is in the 'on' position.
The device has the facility for connecting a remote interlock switch. The laser operates when the remote interlock switch is closed.
Do not remove or obscure the laser's safety labels from the unit.
Do not open the laser housing. Class 3B lasers radiation inside.
The legal requirements for using laser entertainment products vary from country to country. The user is responsible for ensuring
that the product is operated in compliance with local laws & regulations.
Do not use the product if power cord is damaged, it can only be replaced with a power cord provided by the manufacturer.
Do not use the product if the screens and lenses become damaged in any way. They can only be replaced with parts provided by
the manufacturer.
IMPORTANT RIGGING INFORMATION!
Installation should be carried out by qualified personnel only. Improper installation can result in serious injury and damage to
property.
Overhead rigging requires extensive experience. Working load limits should be respected and certified installation materials would
be used.
The installation should be inspected regularly for safety.
Make sure that the area below the installation is free from personnel during rigging, de-rigging & servicing.
Locate the device in a well-ventilated place, away from flammable materials. The device must be located at least 50cm from
surrounding walls.
The device should be installed out of reach of people and away from areas where persons may walk by or be seated.
The device must be securely & rigidly fixed.
The installation should be inspected by professional staff prior to use and regularly thereafter.
Before rigging, make sure that the installation area can support the weight of the device. Use a steel safety cable when mounting
the device overhead.
VAROVÁNÍ!
Nezakrývejte. Uvnitř nejsou žádné součásti opravitelné uživatelem. S požadavkem na servis se odkažte na kvalifikované servisní
oddělení.
Neumisťujte produkt v blízkosti zdroje tepla, jako je radiátor, nebo na místo s přímým slunečním světlem, nadměrným prášení,
mechanickými vibracemi nebo šokem.
Produkt nesmí přijít do kontaktu s vodou a žádné objekty naplněné tekutinami, jako například vázy, by neměly být umístěny na
produkt.
Žádné zdroje otervřeného ohně, jako například svíčky, by neměly být umístěny na produkt.
Umožněte dostatečnou cirkulaci vzduchu a vyhněte se obstrukci ventilátorů (pokud jsou přítomné) pro předejití interního
přehřívání. Ventilace nesmí být narušena překrytím zařízení výrobky jako např. noviny, kuchyňské utěrky, záclony apod.
Toto zařízení obsahuje vyměnitelnou pojistku, která je dostupná bez nutnosti otevření krytu. Odpojte hlavní zdroj napájení před
pokusem o výměnu a vyměňte za stejný typ pojistky.
Toto zařízení musí být uzeměno.
Hlavní kabel umožňuje odpojit zařízení od elektřiny. Ujistěte se, že hlavní napájecí výstup je snadno dostupný a odpojte kabel
pokud zaznamenáte jakoukoliv abnormalitu na zařízení.
DŮLEŽITÉ UPOZORNĚNÍ OHLEDNĚ LASERU!
EN
CZ

Publicidad

loading