Master Appliance PORTA PRO GG-100 TM Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warnings:
!
WARNING: By-products of the combustion of the fuel used by this product con-
tain chemicals known to the State of California to cause cancer and reproduc-
tive harm.
WARNING: The Department of Transportation Hazardous material Regulations
forbid the carriage of butane or other flammable gas products on passenger air-
craft. Do not pack this item or any other flammable gas item, in any checked or
carry-on baggage.
WARNING: Do not clean or remove the adhesive with solvent. May cause fire.
For additional health and safety information, see the product label and Material
Safety Data Sheet for the Master Adhesive used.
Cautions:
!
CAUTION: Allow applicator to cool to room temperature before servicing. Failure
to do so may cause burns.
CAUTION: Do not pull adhesive cartridge from the rear of the applicator while
in operation. Removing adhesive from the rear may cause molten adhesive
to flow out the rear of the applicator which may cause burns and damage the
applicator.
CAUTION: Avoid contact with hot adhesive and the applicator tip. May cause
burns. Wear safety glasses and gloves when using.
CAUTION: If molten material comes in contact with skin dO NOT ATTeMPT
TO ReMOve!!! Cool glue with cool water and/or ice as quickly as possible and
seek medical assistance if burn is over a large area.
Important Notice: User is responsible for determining whether the Master Glue
Gun is fit for a particular purpose and suitable for user's method of application.
Please remember that many factors can affect the use and performance of a
Master Glue Gun in a particular application. The materials to be bonded with the
product, the surface preparation of those materials, the product selected for use,
the conditions in which the product is used, and the time and environmental
condition in which the product is expected to perform are among the many fac-
tors that can affect the use and performance of a Master Glue Gun. Given the
variety of factors that can affect the use and performance of a Master Glue Gun,
some of which are uniquely within the user's knowledge and control, it is essen-
tial that the user evaluate the Master Glue Gun to determine whether it is fit for
a particular purpose and suitable for the user's method of application.

Publicidad

Tabla de contenido
loading

Tabla de contenido