MikroTik hAP ac3 LTE6 kit Manual Del Usuario

hAP ac 3
The hAP ac3 LTE6 kit is a simple home wireless access point. It is configured out of the box, you can simply insert
your SIM card and start using wireless internet.
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to
people and damage to the system.
Read the installation instructions before connecting the system to the power source.
It is the customer's responsibility to follow local country regulations, including operation within legal
frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)
requirements. All Mikrotik radio devices must be professionally installed.
Quickstart
Please follow these quick steps to set up your device:
Insert micro SIM card into the slot;
•
After inserting SIM card close the SIM port lid, do not remove card while the device is powered on.
•
Connect the device to the power source (see "Powering");
•
Open network connections on your PC, mobile phone or other device and search for MikroTik wireless
•
network and connect to it;
The configuration has to be done through the wireless network using a web browser or mobile app - (see
•
"MikroTik mobile
Once connected to the wireless network, open http://192.168.88.1 in your web browser to start
•
configuration, user name: admin and there is no password by default;
When using a mobile application choose Quick setup and it will guide you through all necessary
•
configuration in six easy steps;
Click the "Check for updates" button on the right side and update your RouterOS software to the latest
•
version, must have a valid SIM card inserted;
To personalize your wireless network, SSID can be changed in the fields "Network Name";
•
Choose your country on the left side of the screen in the field "Country", to apply country regulation
•
settings;
Set up your wireless network password in the field "WiFi Password" the password must be at least eight
•
symbols;
Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm
•
Password", it will be used to login next time;
Click on the "Apply Configuration" to save changes.
•
See mikrotik.com/products for the latest version of this document.
LTE6 kit
app"). Alternatively, you can use a WinBox configuration tool http://mt.lv/winbox;
Page 1, Document #53548 Modified on: 11.MAR.2020