Rampage Trailview Tonneau Top Instrucciones De Instalación página 7

Installation Steps
Lift the Trail view soft top and header channel assembly onto the windshield
gasket. 2 person help makes this easier.
26
Un-Fold the Trail view Tonneau main deck fabric over the top of the roll cage and in place.
28
Close the top toward the windshield.
29
Place pivot tubes over the mount hing plate. Install shoulder bolt and nut
using allen key wrench. Nut goes to inside of vehicle and fits into plastic.
27
29
Check the front edge to windshield edge lines up to windshield seal
30
7