Starting Up; Maintenance And Cleaning; Daily Maintenance - Lincar 600 Serie Manual De Instrucciones

Defective parts must be replaced with original replacement parts. Only the
•
Manufacturer of the appliance, either directly or through approved its Service
Centres, is authorised to supply replacement parts and to dismantle and refit
components.
Do not obstruct air vents or heat dissipation openings.
•

2.2 Starting up

Turning off:
To turn the knob into "0" position.
•
Disconnect the power supply.
•
During appliance use, it's advisable to clean the hotplates and remove all the residue
which is deposited, using the proper brush or a damp cloth.
Do not submit any heating element to thermic stress, example given to cool it haste
with waterjets.
Do not use pot smaller than plate.

3 MAINTENANCE AND CLEANING

RESERVED TO USER

3.1 Daily maintenance

Every evening it's necessary to clean carefully the appliance. A daily cleaning
•
ensure a perfect hygiene and a good functioning.
Before starting to clean the appliance, disconnect the power supply.
•
Do not wash the appliance with direct or high pressure jets of water, do not use
•
metal pads, brushes or scrapers in normal steel. If necessary, use stainless steel
pads, but do not rub them against the grain of the metal of the appliance.
Ignition:
To insert the main switch
•
To turn the knob with 6+1 positions,
•
on desired power value.
15/40
mod. G33