General Guidelines; Cleaning And Maintenance; Technical Specifications - HQ-Power XMT25 Manual De Instrucciones

3. General Guidelines

• This device is designed for professional use on stage, in discos, theatres, etc. The XMT25 should only be used
indoors.
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat (see "Technical Specifications"), dust and
moisture. Respect a minimum distance of 0.5m between the device's light output and any illuminated surface.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, lamp
explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
4. Use
• Make sure the power switch of the device is set to OFF.
• Set the power switch of the device to ON. The tree will light up and will start to display beautiful changing colours.
• Use 2 x alkaline batteries (order code LR6C).

5. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections, ...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the lamp.
8. Contact your dealer for spare parts if necessary.

6. Technical Specifications

Dimensions
Total Weight
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
XMT25
∅ 150 x 250mm
180g
45°C
2 VELLEMAN