19 Tune Command (Command: m a)
* This command may work differently Depending
upon model and signal.
* For Europe, Mid-East, Colombia, Asia except South
Korea and Japan Model
► Select channel to following physical number.
Transmission
[m][a][
][Set
ID][
][Data
00][
[
][Data
02][Cr]
• Analog Antenna/Cable
[Data 00][Data
01] Channel Data
Data
00 : High byte channel data
Data
01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data
02 : Input Source (Analog)
- 00 : Antenna TV (ATV)
- 80 : Cable TV (CATV)
• Digital Antenna/Cable/Satellite
[Data 00][Data
01]: Channel Data
Data
00 : High byte channel data
Data
01 : Low byte channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data
02 : Input Source (Digital)
- 10 : Antenna TV (DTV)
- 20 : Antenna Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
][Data
01]
• Tune Command Examples:
1 Tune to the Analog antenna (PAL) Channel 10.
Set ID
= All = 00
Data
00 & 01 = Channel Data is 10 = 00 0a
Data
02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2 Tune to the digital antenna (DVB-T) Channel 01.
Set ID
= All = 00
Data
00 & 01 = Channel Data is 1 = 00 01
Data
02 = Digital Antenna TV = 10
Result = ma 00 00 01 10
3 Tune to the satellite (DVB-S)
Channel 1000.
Set ID
= All = 00
Data
00 & 01 = Channel Data is 1000 = 03 E8
Data
02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack
[a][
][Set
ID][
][OK][Data 00][Data
[Data
02][x][a][
][Set
ID][
][NG][Data
* For South Korea, North/Latin America except
Colombia Model
► To tune channel to following physical/major/minor
number.
Transmission
[m][a][ ][0][
][Data
00][
][Data
[Data
02][
][Data
03][
][Data
- Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.
01]
00][x]
01][ ]
04][
][Data
05][Cr]
27