Important Notices; Error Codes - LaserLiner LaserRangeMaster Pocket Pro Manual Del Usuario

LaserRangeMaster Pocket Pro

Important notices:

• The laser points to the location that will be measured. No objects may
get into the laser's line of measurement.
• The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
• The device cannot be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximum deviation may be greater than 3 mm.
• Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
• Measurements made through glass (window panes) can falsify
measurement results.
• An energy-saving function switches the device off automatically.
Technical data:
Inside measurement range
Accuracy
Laser class
Laser wavelength
Power supply
Dimensions
Weight
Auto switch-off
Operating temperature
Storage temperature
Article number

Error codes:

Err001: Too much ambient light.
Err002: The target is too far away.
Err003: Target is too dark or too much ambient light.
Use a re ecting material as target for the measurement.
Err004: Temperature is too high: > 40 °C.
Err005: Temperature is too low: < 0 °C
Err006: Replace the battery.
Err007: The device is moving too much to measure.
Err008: Pythagoras parameter error: The hypotenuse is shorter as one
side of a right triangle.
(Subject to technical change without notice 01.2011)
O,3 m - 60 m
+ 2 mm
2 < 1mW
635 nm
4 x AAA 1,5 Volt batteries
112 x 59 x 35 mm
190 g
20 s for laser / 5 min for device
0°C – 40°C
-20°C – 70°C
080.943A
GB 13