Bosch GEX 150 TURBO Professional Manual Original página 15

OBJ_BUCH-522-002.book Page 15 Friday, November 14, 2008 10:56 AM
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for dry sanding of
wood, plastic, metal, filler as well as coated sur-
faces.
Machines with electronic control are also suita-
ble for polishing.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Bolt hole
2 Unlocking button
3 Mode selector switch
4 Sealing collar
5 Sanding plate
6 Screw for fastening the sanding plate
7 Allen key
8 Sanding sheet*
9 Auxiliary handle*
10 Extraction outlet piece
11 On/Off switch
12 Screw for extraction outlet piece
13 Thumbwheel for orbit frequency
preselection
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Random Orbital Sander
Article number
Rated power input
No-load speed min
No-load orbital
stroke rate min
Sanding plate speed
in operating mode 1 min
Preselection of or-
bital stroke rate
Orbit diameter mm
Sanding plate
diameter mm
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 81 dB(A);
Sound power level 92 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
tainty K =1.5 m/s .
1 609 929 N99 | (14.11.08)
English | 15
GEX 150 TURBO
Professional
0 601 250 7..
W 600
-1
3100– 6650
-1
6200– 13300
-1
290– 620
4.5
150
kg 2.4
/II
2
=8.5 m/s , Uncer-