Instructions Of Use; Maintenance And Cleaning; Environment Protection - Jata electro HN916 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

INSTRUCTIONS OF USE

• Depending on the type of cooking you are doing, place the grid (6) or the tray (7) higher or lower,
as the food will be closer or farther to the upper or lower resistances.
• plug the appliance into the mains.
• select the position with the function selector knob (2) the type of function of the oven, bearing in
mind that:
- position 0.- off.
- position
- Heats the lower resistances.
- position
.- only heats the upper resistances.
- position
.- Heats the upper and lower resistances.
• Turn the temperature control knob (1) to the desired position depending on the food you are
cooking. Generally speaking it is advisable to set it to its maximum (230 ºC) position so the oven will
reach the sufficient temperature quickly. later you may set the knob to the position corresponding
with the temperature that you consider appropriate.
• Next turn the timer knob (4) to choose the desired working time (maximum 60 minutes). When you
do so the indicator (3) will go on and the oven will begin to heat up.
• When the appliance has reached the selected temperature the indicator (3) will go off. Then
introduce the food.
• During the working period the indicator (3) will go on and off in an intermittent way indicating
that the appliance switches on and switches off maintaining constantly the selected temperature.
• When the time programmed runs out the oven will go off automatically. Then an acoustic signal
will ring.
• If you wish to stop the oven before the time runs out, set the function selector (2) to the "0"
position.
• To remove the tray (7) or the grid (6) use the handle (8) to avoid getting burned.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning make sure the appliance is disconnected from the mains.
• To clean the inside, do not allow to cool completely. It is easier to clean when it is still warm.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the
surfaces. Use a damp cloth.
• To clean the inside, you may use a soft cloth with water, and if necessary a little soap.
• The accessories may be cleaned with soap and water, taking care to rinse them well afterwards.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. so you will help to the improvement of the environment.
manual jata HN916.indd 12
12
19/12/17 15:12

Publicidad

Tabla de contenido
loading

Tabla de contenido